CALL US NOW
01463 250275
0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.
  • EP-5 EP-5
Previous

Pentek EP-10 5 Micron Carbon-Briquette Cartridge

Pentek EP-5 5 Micron Carbon-Briquette Cartridge

Quick Overview

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance
£7.00
  • Buy 24 for £5.00 each and save 29%

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Details

This Pentek EP-5 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns, and a recommended flow rate of 2 gallons per minute (gpm). The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 1,500 gallons at a flow rate of 2 gpm. This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge is used for purification of residential and commercial drinking water.

Specifications
  • Nominal filtration rating - 5 microns
  • Recommended flow rate - 2 gpm
  • Chlorine reduction capacity - 1,500 gallons at 2 gpm
  • Temperature range - 40 to 180 degrees F (4.4 to 82.2 degrees C)
  • Maximum dimensions (H x W) - 4-7/8 x 2-7/8 inches (124 x 73 mm)


  • The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

    H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

    Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

    Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance

Additional Information

Weight 0.2500
Length 4 7/8"
Internal Diameter No
Outer Diameter 2 7/8"
Chlorine Reduction (litres) 11,500
Chloramine No
Manufacturer Pentair

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register