The PRF-RO, the replacement to the Merlin RO system, has been designed to meet the requirements for smaller, more robust RO systems without any reduction in performance. Membranes, cartridge and all componentry locate into a manifold that makes the PRF-RO a third smaller in size, with just three simple push-fitting connections colour-coded for absolute simplicity.
Incorporating two high-flow membrane elements in series to produce an average of 1.9 lpm of purified water, protected by an all new carbon impregnated fibredyne pre-filter delivering twice the loading capacity, up from 19,000 to 38,000 litres. With the concentrate from one element being channelled through the second, the waste water is reduced by approximately 75% compared to conventional systems.
- Up to 2,600 litres per day of on-demand purified water without the need for water storage
- Works on mains pressure (2.8 bar+) requiring no pump or electricity for most applications
- NSF/ANSI 58 validated
- Up to 75% less waste water
The PRF-RO comes complete with a pressure guage, tap, pipe and drain fitting. It does not come with a fitting to connect the PRF-RO to the mains. Various fitting optins are shown below.