Osmosis is a natural process that occurs in every living organism. Domestic reverse osmosis systems harness the efficiency and natural ingenuity of reverse osmosis technology.
The EcoSoft filters contain a Filmtec membrane produced by Dow Water and Process Solutions. Over 200,000,000 Litres of water is purified by Filmtec membranes throughout the world in just one day. Three EcoSoft pre-filters remove a range of noxious impurities from water supplied to the RO membrane. This helps to protect the membrane and ensure a long life of your personal drinking water source. Enjoy immediate availability of crystal pure water with straightforward installation and minimum maintenance.
Stage 1 - 5 micron Sediment Filter (replace every 6 months)
Stage 2 - Granular Activated Carbon (replace every 6 months)
Stage 3 - 1 micron Sediment Filter (replace every 6 months)
Stage 4 - 50 gpd Filmtec RO Membrane (replace every 18-24 months subject to use)
Stage 5 - Coconut Shell Carbon Filter (replace every 6 months)
Stage 6 – Re-mineralising filter (replenishes the end product with minerals lost in extraction that you may desire, such as calcium and magnesium.
Tank Capacity: 12L (3.2Gal)
Plastic storage tank (general vol. 12 L, effective vol. up to 7 L)
Chrome ball valve faucet ‘Droplet’ for purified water
Included feed water adaptor with feed valve for connection with water mains
Ball valve faucet of storage tank
Set of colour tubes (4 pc.) for convenient filter installation
Drain saddle clip for connection of the filter to sewers
Set of replacement pre-filters (1st, 2nd, 3rd stages)
EcoSoft membrane 50 GPD (190 L per day)
Drinking Water Filter
Service wrenches for replacement of filters and the membrane
Inlet pressure for filter without pump, atm 3-6
Inlet pressure for filter with pump, atm 2-4.5
Pressure in storage tank, atm 0.4-0.6
Filter weight (basic configuration), kg 7
Temperature of environment limit, °C +5 - +40
Water supply of external connection, inches thread ½
Dimensions of system, HxWxD (basic configuration), mm 420x410x150
Dimensions of tank, HxWxD, mm 350x260x260
Typical rejection rates of common drinking water contaminants *
Contaminant Rejection Range*
Organic Halides 83-92%
Total dissolved solids 95-99%
*Range of percentages of each contaminant removed.